This machine is designed scientifically and logically with frame structure. Drop the location of transmission part gravity to make sure high speed run smoothly. The main axis is designed much more thickness to plus the torsion. That makes bearing capacity stronger.
|No.of die orifice||19(双排)||23(双排)|
|Capsule number||00#-5#;安全型A、B (safety A,B)|
|Idle load noise dB(A)||<73|
|Power||380V 50HZ 8KW||380V 50HZ 10KW|
*Data printing function，pellet device, dry vacuum pump (for your choice).
Adopt needle brush blowing clean way to clean the mould thoroughly.
Division box of RU180 which make sure steady and accurate transmission.
Arrangement mode of back and forth misplacement mould could improve the filling accuracy of power.
Automatic switch-over and control the capsule blanking and decrease manually operation.
The lower mould is for positioning when changing mould,good interchangeability and adjust exactly.
Dual discharge chute structure
This capsule closing device can be adjusted manually.It works steady and exactly.
The middle adjustable ramming holder
The lower mould is pushed by two shafts,it’s better than single shaft.
Reduction design of transmission could decrease the shock of the whole machine
The output tunnel with servo motor work exactly lower noise,no pollution
Add：Liucheng Street, Chaoyang City, Liaoning Province